BRK Electronics Hard Wired T3 Smoke Photoelectric Alarm with Backup & Strobe
The 7010BSL is a hard wired photoelectric T3 smoke alarm with battery backup and strobe light designed to meet ADA requirements where a smoke alarm with integrated 177 candela strobe light are specified.
The BRK 7010BSL is a hard-wired photoelectric smoke alarm with integrated strobe light and battery backup. Battery backup will not power the strobe light. Hard-wired alarms must be installed by a licensed electrician.
Alarm latch visually identifies initiating alarm even after alarm condition is over
Low battery indicator
T3 alarm sound pattern (3 beeps pause strobe light flashes constant approximately 1 flash per second)
Smart Strobe works with BRK smoke and CO alarms with separate flash patterns to distinguish between smoke/heat or CO dangers
177 Candela Xenon strobe light
1Hz flash rate: 60 flashes per minute
Silence button test/silence
Dimensions: 5.25" L x 4.13" W x 5.44" H
Battery backup uses 2 AAA batteries (batteries included - will not power the strobe light during power outages)
Smart Interconnect enables the 7010BSL to be interconnected with up to 18 BRK alarms of which 12 can be smoke alarms
Two silence features temporarily silences low battery chirp for up to 8 hours or silence an unwanted alarm for several minutes
Meets ADA requirements
[Click for user manual]"